Electrolux EWW 168540 W Manual De Instrucciones página 10

10 electrolux
will propose a temperature and automatical-
ly select the maximum spin value provided
for the programme you have chosen. You
can change these values by operating the
corresponding buttons. The green pilot
light of the button 8 starts to flash.
The selector dial can be turned either clock-
wise or counterclockwise. Turn to position
to reset programme/Switching the ma-
chine off.
At the end of the programme the selec-
tor dial must be turned to position
to switch the machine off.
Caution! If you turn the programme
selector dial to another programme
when the machine is working, the red
pilot light of button 8 will blink 3 times
and the message Err is displayed to
indicate a wrong selection. The
machine will not perform the new
selected programme.
Select the temperature by pressing
button 3
By selecting a programme, the appliance
proposes automatically a default tempera-
ture.
Press this button repeatedly to increase or
decrease the temperature, if you want your
laundry to be washed at a different temper-
ature.
Reduce the spin speed by pressing
button 4
By selecting a programme, the appliance
proposes automatically the maximum spin
speed provided for that programme.
Press button 4 repeatedly to change the
spin speed, if you want your laundry to be
spun at a different speed.
Select an additional rinse
This appliance is designed for saving water.
However, for people with a very delicate
skin (allergic to detergents) it may be neces-
sary to rinse the laundry using an extra quan-
tity of water (Extra Rinse).
To activate this option press simultaneous-
ly the buttons 5 and 6 for some seconds.
The relevant icon will appear on the display.
This function stays permanently on.
To remove it press the same buttons again
until the Extra Rinse icon disappears.
All manuals and user guides at all-guides.com
Select the Delay Start by pressing
button 7
Press the button 7 repeatedly to select the
desired delay. The corresponding icon 2.10
will appear on the display.
The set delay time value (up to 20 hours)
will appear for a few seconds, then the du-
ration of the programme will appear again.
You must select this option after you have
set the programme and before you press
button 8 .
, You can cancel or modify the delay time at
any moment, before you press button 8 .
Selecting the delayed star :
1. select the programme and the required
2. set the delay start by pressing the but-
3. press button 8 . The machine starts its
Cancelling the delayed start after hav-
ing pressed button 8 :
1. set the washing machine to PAUSE by
2. press button 7 once until the symbol
3. press button 8 again to start the pro-
Important! The selected delay can be
changed only after selecting the washing
programme again.
The Delay Start can not be selected with
the draining programme.
Start the programme by pressing
button 8
To start the selected programme, press the
button 8 , the green pilot light of the button
8 stops blinking. The icon 2.8 appears on
the display to indicate that the appliance
starts operating and the door is locked.
To interrupt a programme which is running,
press the button 8 : the green pilot light
starts to blink.
To restart the programme from the point at
which it was interrupted, press the button 8
again . If you have chosen a delayed start,
the machine will begin the countdown.
If an incorrect option is selected, the red pi-
lot light of the button 8 blinks for 3 times
the message Err is displayed for few sec-
onds.
options.
ton 7 .
hourly countdown. The programme will
start after the selected delay has expired.
pressing button 8 .
is displayed
gramme.
'