Sanyo VA-EXH Manual De Instrucciones página 12

e00_l8hcb_xe_7.book Page 11 Thursday, March 10, 2005 3:23 PM
2 INITIALIZING THE HARD DISK
4
Then turn the shuttle dial clockwise.
The <WARNING> screen is displayed. "NO" is flashing.
5
Turn the jog dial to select "YES" and
then turn the shuttle dial clockwise.
The "HDD INITIALIZING !" screen is displayed and the hard
disk is initialized.
When initialization is completed, the display returns to the
<HDD SET> screen.
EXIT/OSD
6
Press the [EXIT/OSD] button.
The setting is completed and the display returns to the normal
screen.
EXIT/OSD
Mirroring commences if "MIRRORING" is set "ON" in step
3. Mirroring is performed in the following combinations:
• EX-DISK 1 and EX-DISK 2
• EX-DISK 3 and EX-DISK 4
English
<WARNING>
THIS CHANGE WILL INITIALIZE THE DISK.
ALL RECORDING WILL BE ERASED.
ARE YOU SURE ?
NO
CHANGE:JOG SET:SHUTTLE
HDD INITIALIZING !
11