Sanyo VA-EXH Manual De Instrucciones página 7

e00_l8hcb_xe_7.book Page 6 Thursday, March 10, 2005 3:23 PM
1 HARD DISK INSTALLATION AND CONNNECTION TO DVR
4
Attach the hard disk bay with the hard
disk attached to it in step 3 to the
external storage unit.
Secure the screws in the order (1-4) marked on the hard disk
bay.
"4"
"2"
* Tightening torque: 0.6 N•m - 0.7 N•m (6 - 7 kgf•cm)
5
Connect the cable to the hard disk.
(1) Select the cable with the same number as the hard disk
bay with the hard disk attached to it, and remove the
securing clamp.
* The cable number is printed near each cable.
* Use a screwdriver to remove the clamps.
Hard disk
connector for the
3rd hard disk
Hard disk
connector for
the 1st hard
disk
" 1 "
" 3 "
Fan
(2) To prevent the cables coming in contact with the fan,
secure them with the clamps. The securing procedure
differs according to the cable number.
1
"1"
Match the
markings.
2
"3"
[Arranging the cables]
Connecting the cable to the first hard disk (
Hard disk
connector for the
2nd hard disk
Hard disk
Connecting the cable to the second hard disk (
connector for
the 4th hard
disk
" "
4
" "
2
Fan
Connecting the cable to the third hard disk (
6
and 4
and 3
1
)
2
)
3
)
English