Technical Specifications; Important Safeguards - Fagor PLV-127 Manual De Instrucciones

interior.qxd 10/4/03
1. DESCRIPTION OF APPLIANCES
4
3
2
1
5
6
1. Shot of steam iron.
2. Handle with removable water tank.
3. Water tank Cap.
4. Water tank button.
5. Release lock button.
6. Temperature dial.
7. Handle lock button.
8. Soleplate.

2. TECHNICAL SPECIFICATIONS

Voltage - Frequency: 125/230V~60/50Hz.
Power: 300W/1000W.
Tank capacity: 40ml.

3. IMPORTANT SAFEGUARDS

• Read all instructions before using.
• The iron has a " self-adapt" operating
voltage range from 115V-230V, hence,
users are not required to select the
voltage manually.
• Use the iron only for its intended use.
• The iron should always be turned to 'OFF'
before plugging or unplugging from the
wall socket. Never yank the cord to
disconnect from the wall socket, instead
All manuals and user guides at all-guides.com
17:09 Página 15
ENGLISH
7
13
grasp plug and pull to disconnect.
• Do not operate iron with a damaged
cord/plug or if the iron has been
dropped or damaged. To avoid the risk
of electric shock, do not disassemble
the iron, take it to a qualified
serviceman for examination and repair.
Incorrect reassemble can cause a risk
of electric shock when the iron is used.
• Take care: if you are leaving the
appliance momentarily always switch it
'OFF', remove the plug from the wall
socket and stand the iron on its base.
• Close supervision is necessary for any
appliance being used by or near
children. Do not leave the iron
unattended while connected or on an
ironing board.
• To protect against a risk of electric
shock, do not immerse the iron in water
or other liquids.
• Burns can occur form touching hot
metal parts, hot water or steam. Do not
use the steam iron upside down-there
may be hot water in the reservoir.
• Do not allow cord to touch hot surfaces.
Let the iron cool completely before
putting away, loop cord loosely around
when storing.
• Always disconnect the iron from the
electrical socket when filling with water
or emptying and when not in use.
• To avoid circuit overload, do not
operate another high wattage appliance
on the same circuit.
• If an extension cord is absolutely
necessary, a 10-ampere cord should be
used. Cord rated for low amperage may
overheat. Care should be taken to
arrange the cord so that it cannot be
pulled or tripped over.
• The travelling iron is not intended for
regular use.