IARP BRERA Instrucciones De Uso página 23

Modello - Model - Modèle
Modell - Modelo
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
Maintenance operator:
drawing of coins and inner and outer cleaning of the vending machine.
If the vending machine is malfunctioning, the intervention of technical support must be requested.
The tasks of the additive on receipt can not be delegated to children, adolescents or non self-sufficient people.
Technical support:
and technical assistance of the vending machine. He is the only to have the "safety micro-switch key" which enables
to exclude the safety system.
THE REFRIGERATOR IS NOT SUITABLE FOR WORKING IN DANGEROUS ENVIRONMENT WITH RISK OF
FIRE, EXPLOSIONS OR RADIATIONS.
Operation is regular with ambient temperature indicated on technical data plate.
The minimum environmental temperature for correct operation of the equipment is 20°C.
CLIMATE CLASS
3. MOVEMENT AND LIFTING OF THE PACKAGE
Handling is reserved to the authorised after-sales service.
The vending machine should be lifted exclusively by the bottom (in vertical position) using transpallets
having a carrying capacity of at least 250 Kg.
Position forks under the pallet paying attention that they protrude by the other side.
Be sure that the back of the packing is free from obstacles.
Lift the packing with care and take it to the place where it will be unpacked.
Avoid jerking and jolting.
Be careful with differences in ground levels, bumps, obstacles, difficult passages, etc...
4. CHARACTERISTICS OF THE PACKAGING AND UNPACKING
WARNING! Use protective gloves during unpacking and installation
operations.
The unit is sent fastened to a wooden pallet protected by corner risers, with a cardboard cover
and protected internally by a nylon shell.
At the arrival of the packed vending machine it is advisable to place it in vertical position, in a
sheltered and dry place with a plane and strong surface.
Control the integrity of the packing at the very moment of delivery and in presence of the carrier.
Damages, if any, might mean a "troubled" transport during which the machine itself might have
been damaged. Point out anomalies, if any, before any attempts to handle or unpack the machine.
To unpack the refrigerator with packaging in the vertical position:
1. Free and remove the nylon casing (the vending machine can remain temporarily on the
wooden pallet).
2. Unscrew the feet (A).
3. Remove the vending machine from the pallet:
• If using a pallet truck, remove the part (B) of the pallet and lift the equipment
by inserting the pallet truck as indicated in the figure.
• If using a forklift, insert the forks as indicated in the figure.
4. The vending machine does not have holding points for lifting from above.
ATTENTION! After unpacking, check that the appliance has not
suffered damage during transportation.
NOTE - After having installed the unit, dispose of the packing in conformity with the
regulation in force.
In the event of damage, contact the supplier of the equipment.
BRERA
CHELSEA
TROCADERO
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
Person, who is responsible for the normal starting and stopping operations, insertion,
Specialized person in charge of carrying out all installation operations, adjustment,maintenance,
N
SN
ST
T
ENVIRONMENT OPERATING TEMPERATURE
32°C ± 1°C
32°C ± 1°C
38°C ± 1°C
43°C ± 1°C
2 3 / 9 6
PAGE
UM000492
N° DOC
A
Forklift forks
B
Pallet truck forks