Viesta TH12 Manual Del Usuario página 6

C B A
The thermostat provides the option to program 23 time settings, irrespective of the day,
i.e. a total of 161 switching programs per week.
For each hour, a temperature mode (power saving mode or comfort mode) can be set.
These are shown in the display with a series of figures at the up and bottom of the display
You have already set the temperature value beforehand: (see "Preset temperature mode").
The comfort function is displayed as a
The energy-saving function is displayed as a
Set the time , day and program with following steps.
- Press and hold the P button for around 3 seconds.
The minutes display (A) flashes.
- Change this value using the + and – buttons.
- Press the P button.
The hour display (B) flashes.
- Change this value using the +and – buttons.
- Press the P button.
The day display (C) will flash as a number.
- Change this value using the + and – buttons.
Use 1 for Monday, 2 for Tuesday, 3 for Wednesday, 4 for Thursday, 5 for Friday, 6 for Saturday and
7 for Sunday.
1) By pressing the key P again, you will enter the programing of the switching times.
The Program- (D) and Modus symbol (F) will be displayed.
If the box is black, a switching time is running and the comfort mode ( ) with the set
temperature will be active at this time.
If a field is empty, the power saving mode (
2) The programming starts with Monday.
You will see that the number 1 (E) is displayed (in the picture Tuesday is shown (E)).
With "P", you can click from 1 to 7 through the days of the week.
DAY, TIME AND PROGRAM SETTINGS
D E
( )
symbol (f.e. 25.5°C).
(
[ EN ● 6 ]
A) Minutes (actual time)
B) Hours (actual time)
C) A ctual weekday
D) F irst hour (programming mode)
E) Week day (programming mode)
F) Temperature mode display
F
)
symbol (f.e. 20.5°C)
) is enabled.
Version: 8.0
19.10.2017