Descargar Imprimir esta página

Important Safety Instructions; Get To Know Your Gear - GOAL ZERO YETI LINK Guia Del Usuario

Ocultar thumbs Ver también para YETI LINK:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 27

IMPORTANT SAFETY INSTRUCTIONS

Please save these instructions
Read all the instructions and cautions before
beginning installation.
No liability is assumed for damages resulting in the use of the
information contained herein.
CAUTION: The Goal Zero Yeti Link outputs very high amperages. Use
only with Goal Zero cables. Altered cables or connectors or 3rd Party
cables or connectors may be incompatible and may cause damage to
components, vehicle or person.
WARNING To reduce risk of fire, injury to persons or damage to
property, use only in the manner intended by Goal Zero
Do NOT disassemble or attempt to repair the module.
Do NOT allow water to enter the module, the Goal Zero Yeti Lithium, or
the Goal Zero Yeti Tank.
Ensure cable is fully inserted and tightly in place before use. Check
upon subsequent uses. For questions, contact Solutions Center at
support@goalzero.com or 1-888-794-6250
Do NOT chain third party solar panels or lead acid batteries in series
(connecting positive to negative, positive to negative, etc.), as this
can result in dangerously high levels of voltage that can cause serious
damage to the Yeti Lithium and potential bodily injury.
Compatible with Yeti 1000, 1000X, 1400, 1500X, 3000, 3000X,
and Yeti 6000X Lithium Power Stations
WARNING: Never connect a power source to the Yeti Link before
installing into the Yeti. Always connect the Link to the Yeti before
connecting any power source.
WARNING: Do not exceed 22V input for the Link. Doing so can
cause serious damage to the Yeti and potential bodily injury. Take
note of voltages when using third party solar panels or third party
lead acid batteries with the module. Do not chain solar panels
or lead acid batteries in series (positive to negative, positive to
negative, etc.), as this can result in dangerously high voltages.
1

GET TO KNOW YOUR GEAR

Front of Link Expansion Module
Input Charge Indicator
Pinhole Reset
Button
Data Transfer Connector
Master 8mm Input
for Yeti Link & Yeti Tank
Expansion Battery
Lead-Acid State of
Charge Indicator
Fan Vent
Blue Connector
2

Publicidad

loading