Bestop Trektop Manual De Instrucciones página 9

Install Rear"J" Rail Seal
Section 3
Step 1
Align the cut outs to the fender bolts.
Note:
It is very important to align the cut
outs to the fender bolts first.
P9 - 56872 Rev. I 0921
Align with these bolts
Rear Seal Film Right (Shown)
Part #609.42
Qty.1
Rear Seal Film Left
Part #609.43
Qty.1
Installation Instructions - Trektop for Bronco 2 Door
Parts
Remove the paper backing from the adheasive
on the side with the cut outs and adhere the
film to the vehicle.
Step 2
Page 9
© 2021 Bestop, Inc.