General Description; Technical Data; Homologations - A.E.B. PITAGORA 160 Instrucciones De Montaje

The PITAGORA Emulator is an international patented device that cut - off and
simulates injector operation when vehicle is used with GAS, thus avoiding
ignition of the Check Engine warning light and possible malfunctions due
to injectors cut - off data memorised in the injection electronic control box.
This new emulator combines three different types of simulations in one sole
product and simulations are selected by means of two switches. This means that
PITAGORA, by simply combining different types of wiring harness according to
different types of connectors fitted to injectors, can be used on the majority of
European, American and Japanese vehicles: it simulates, in fact,
full - group and sequential injections without distinction.
Power supply voltage
Emulation for injectors from
Possibility of selecting 3 different types of emulation.
Injector interface harness is made using 4 Bosch connectors that
can be interfaced with the original cabling of the injectors.
Adjustment of overlap time for
switching from petrol to gas
Individual interruption and emulation for each injector.
Mark approval
e
3

GENERAL DESCRIPTION

TECHNICAL DATA

No need to control polarity of injectors.

HOMOLOGATIONS

020224 (95/54/CE)
10 ÷ 14 Vdc
da 11 ÷ 16 Ohm
from 0 ÷ 1 second approx
Description
Regulation ECE/ONU N°10 .
15