Warnings; Package Contents - A.E.B. PITAGORA 160 Instrucciones De Montaje

- Install in an upright position far from any possible infiltration
of water.
- Install far from any sources of excessive heat (eg. exhaust
manifold).
- Install far from the ignition coil and pass the wiring far from the
high voltage cables.
Make good electrical connections without using a "current tap. "
Bear in mind that the best connection is duly insulated welding.
Never open the emulator box for any reason whatsoever,
especially with the engine running or the panel switched on.
A.E.B. disclaims all liability for any damage or injury
deriving from unauthorized personnel tampering
with its device.
When running on gas the emulator blocks and simulates the injectors,
while the electric petrol pump stays in operation. It is therefore important
there is always petrol in the petrol tank to prevent the pump overheating
and getting irreparably damaged.
You will find:
1)N°1 Packing box
2)N°1 Instructions
3)N°1 Cpu
4)N°1 Connection harness
16

WARNINGS

PLEASE NOTE

PACKAGE CONTENTS