weasy WIND160 Manual De Instrucciones página 5

Installation
Assembly of your stand fan (for cross base)
/1.Your stand fan has been boxed unassembled to minimize packaging waste. Each part is designed
to fit together and be disassembled easily for cleaning or storage. Assemble the base to the support
pole using the fasteners provided.
2.Loose the height adjustment ring and extend the support pole to your desired height.
Retighten the height adjustment ring to prevent slipping, then place the fan assembly onto the pole
and tighten the pole screw manually.
3. Fit the motor to the stand pole and secure using the screw.
4. Remove the blade cap by turning it clockwise, then the locking nut by turning is anti-clockwise
from the motor axis.
5. Place the rear guard onto the motor through the axis, ensure the rear guard fits onto the locating
lugs, if this is done correctly, the carrying handle is at the top.
6. Fix the rear guard into position by replacing the locking nut.