weasy WIND160 Manual De Instrucciones página 6

7. Put the blade through the motor axis, use the blade cap to fasten the blade. The groove in the
centre of the fan blade aligns with the T-bar on the motor axis to ensure correct positioning.
8. Fit the front guard to the rear guard, align both guards and tighten them together using the guard
ring.
Using Your Stand Fan
CAUTION: The fan must be sited on a flat and stable surface.
Before connecting the fan to your mains AC socket, set all the switches to the OFF Position.
Speed
0 OFF
1 Low
2 Mid
3 Hi