Function Introduction - Blackview X2 Manual Del Usuario

function introduction

1.Message Reminder
Turn on "H Band"-> My-> My device-> Message Reminder, you can freely control the function switch
which can push messages to the watch. If the function switch is off, the messages cannot be pushed to the
watch; if it is on, the messages are normally pushed to the watch.
please click the help in the upper right corner to
2.Alarm Clock Setting
Open "H Band"-> My-> My device-> Alarm Reminder-> click the upper right corner '+', set the time and
date of the reminder (if you set a Repeat Alarm, select the Repeat Time)-> click the top right Angle "√".
The setup is OK.
3.Sedentariness setting
Open "H Band" --> My--> My equipment--> Sedentariness reminder--> turn on --> click to enter the
setting page (set the start and end time as well as sedentariness judging interval) --> save. The default is
14:00 p.m.-18:00 p.m. and reminding every 60 minutes.
When it is "on", the user can set the sedentariness judging interval and the watch shall start to
continuously monitor the user to confirm whether he or she is sitting. In case the user keeps sitting for
more than the set time period, the watch will vibrate and display the sedentariness reminder interface.
4.Heart rate alarming
Open "H Band" --> My--> My equipment--> Heart rate alarming --> turn on --> click to enter the setting
page (set the alarming value) --> save. The default is 115bpm. In case the heart rate is detected equal to
or higher than the set value, the watch will vibrate to remind the user.
5.Binding equipment
Open "H Band" --> My--> My equipment --> Binding equipment --> turn on.
After unlocking this function, when the watch syncs the data to APP, APP shall save the data locally (if
the user logs in without using any account) or upload to cloud (in case the user logs with certain account).
(Note: If you can't switch normally,
troubleshoot)
8