Storage And Maintenance; Voice Function; Volume Control - Beurer GS 39 Instrucciones Para El Uso

General notes
• Please note that measuring tolerances are possible for technical reasons, as
this scale is not calibrated for use in a professional medical context.
• The scale's maximum capacity is 150 kg (330 lb / 24 st). The measurements
are displayed in 100-g intervals (0.2 lb).
• When supplied to the customer, the scale is set to weigh and measure in "kg"
and "cm".
• Place the scale on an even, hard surface; a hard surface is crucial for achie-
ving accurate measurements.
• Repairs may only be carried out by Beurer Customer Services or authorised
retailers. Before submitting a complaint, please check the batteries first and
replace them if necessary.

Storage and maintenance

The accuracy of the measurements and service life of the device depend on its careful handling:
Important
• The device should be cleaned from time to time. Do not use any abrasive cleaning products and
never submerge the device in water.
• Make sure that no liquids come into contact with the scale. Never submerge the scale in water.
Never rinse it in running water.
• Do not place any objects on the scale when it is not in use.
• Do not press the button violently or with pointed objects.
• Do not expose the scale to high temperatures or strong electromagnetic fields (e.g. mobile tele-
phones).
• Protect the device from knocks, damp, dust, chemicals, marked temperature fluctuations and ne-
arby sources of heat (ovens, heaters).
General tips
• As far as possible, weigh yourself at the same time of day (ideally in the morning), after having be-
en to the toilet, on an empty stomach and without clothing, in order to obtain results which can be
compared.
• Stand up straight and still during the measurement.

5. Voice function

The device has 5 language settings:
German (DE), English (EN), French (FR), Spanish (ES) and Russian (RU)
The device is set to German when supplied to the customer.
To change the language, switch the scale on as described in the "4.2 Measuring weight" chapter
and wait until "0.0" is shown on the display. Now press the middle button, "Language", on the back
of the scale, until the desired language is announced.

Volume control:

You can adjust the volume of the language function as you wish, or switch it off by repeatedly pres-
sing the " +/-" button on the back of the scale.
Note: Language off (no beep) means that voice output is not selected and the measurement value
will not be announced.
14