Samsung Techwin SDP-760 Manual Del Usuario página 18

setup & application
Setting the mask
You can mask a portion or the whole of the screen so that it is hidden.
1. From the menu, select imAGe ADJuSTmenT  mASK SeTup.
2. Select mASK SeTup to display the sub menu items.
• BOUNDS : With BOUNDS, select the display device currently using.
Press [►] button to select BOUNDS mode in the order of <VGA/USB  C-VIDEO>.
• TONE : Select a tone level.
Each time you press [►], the tone value will switch to <LEVEL 1-2-3-4>. The lower the level is, the
greater the transparency of the masking area becomes.
• WIDTH : Select a mask width.
Press [◄] or [►] button on the control panel to set the area between 1~100.
• HEIGHT : Select a mask height.
Press [◄] or [►] button on the control panel to set the area between 1~100.
When the mask setting is completed, press the
M
`
right buttons to move the masking area.
Note that the mask WIDTH/HEIGHT value is not absolute value but relative and proportional to the width/height of the
`
video in applicable aspect ratio, which will differ from resolution setting.
18_
setup & application
All manuals and user guides at all-guides.com
mASK SeTup menu
BOUNDS VGA/USB

TONE LEVEL 4
··· * ··· ··· ··· 25
WIDTH
··· * ··· ··· ··· 25
HEIGHT
RETURN }
button on the control panel to activate it. Use the left/