Before You Start - Brita Redi-Twist Instrucciones De Instalación

Before You Start

• Locate space in your cabinet to
secure water filter system.
• Check under the sink to locate a solid
wall surface to mount the filter system.
**FILTER SYSTEM MUST BE
MOUNTED IN A VERTICAL
POSITION**
• Position on cabinet wall to provide
easy access for future cartridge
change-outs.
• If you have anything other than
flexible hose under your sink, check
to see if you need to purchase
special fittings.
• Turn off cold water shut-off valve to
kitchen sink.
• Turn on cold water faucet on kitchen
sink to release water pressure.
• Be sure to have the correct size
compression cap to seal off the
spray hose connector stem.
Note: If you have an existing auxiliary faucet in place that you wish to use, it will require a faucet stem that connects to a
3/8" water line. Only a Brita® Auxiliary Faucet will provide certified reduction claims with the Brita® USS-301 System.
Auxiliary Faucet Installation Instructions
Helpful Hints
WARNING
Version 1.0D
5