Brita Redi-Twist Instrucciones De Instalación página 9

<< Step continued from previous page
materials and tools needed
CONNECT END OF TUBING
AUXILIARY FAUCET ADAPTER
AUXILIARY
FAUCET
ADAPTER
NEXT INSERT TUBING
AUXILIARY FAUCET
• Determine lengths of 3/8" plastic tubing needed to connect to both inlet port to
Auxiliary Faucet Adapter and outlet port to Auxiliary Faucet.
• Cut 3/8" plastic tubing squarely on both ends to length.
• Avoid extra long lengths that may create kinks in the line.
• Insert all tubing into push-to-fit connectors as illustrated.
Auxiliary Faucet Installation Instructions
utility knife
Note: Tubing needed for this step is not included in package. Use the 3/8"
tubing that came with your Brita® USS-301 Redi-Twist™ Filtration System.
(A)
TO
3/8" PLASTIC TUBING
A
(B)
INTO END OF FAUCET STEM
B
auxiliary faucet installation
Step 3
Attach tubing/fittings
to the water line/head
wet ends of tubing before inserting
cut squarely on both ends
do not bend or crimp
do not cut at an angle
THEN CONNECT OTHER END OF TUBING
(A)
TO INLET PORT ON SYSTEM HEAD
3/8" PLASTIC TUBING
A
FINALLY CONNECT TUBING
FAUCET TO OUTLET PORT ON SYSTEM HEAD
SYSTEM HEAD
SYSTEM HEAD
(B)
FROM AUXILIARY
3/8" PLASTIC TUBING
B
9 9
Version 1.0D