Controlling The Temperature - Samsung RF268AB Manual Del Usuario

Energy saver
This icon will light up when you press the energy Saver button. The Energy Saver function is
automatically set to "ON" when power is supplied to the Refrigerator. If condensation occurs on the doo
turn the Energy Saver mode off.
Lighting
This icon will light up when you press the Lighting button. In this case, the dispenser light(under the
display) will be on constantly. If you would like the dispenser light to come on only when using the
dispenser, turn the Lighting mode off.
Alarm
This icon will light up when you press the Alarm button. The door alarm will sound if any door is open f
more than 3 minutes. The beeping stops when you close the door. Initially the Alarm is set to on.
Fridge ice off
This icon will light up when you press the Fridge ice off button. In this case, the fridge ice will not be produced.
Freezer Ice off
This icon will light up when you press the Freezer ice off button. In this case, the freezer ice will not be
produced.
• As this refrigerator has a dual Ice Maker, there is a possibility of using more energy. We
recommend if you have enough ice, set ice off to save energy.
• You may occasionally hear noises from Ice dropping or water flowing to the icemaker. These
noises are part of normal operation.
Lock
This icon will light up when you press the Lock button. In this case, you won't be able to use the contro
panel. If you press and hold the Ice Off/Hold button for 3 sec to unlock Child Lock, you will be able to u
the control panel again.

ContRoLLing tHE tEMPERAtuRE

Basic temperature of Freezer and Refrigerator Compartments
The basic temperature and/or recommended temperatures of the Freezer and Refrigerator Compartments are -2°F
and 38°F respectively.
If the temperature of Freezer and Refrigerator Compartments are too high or low, adjust the temperature manually.
Controlling the Freezer temperature
The Freezer temperature can be set between -8°F and 8°F to suit your
particular needs. Press the Freezer button repeatedly until the desired
temperature is shown in the temperature display. The temperature will
move 2°F degrees with each press (-2°F ➝ -4°F ➝ -6°F ➝ -8°F ➝ 8°F ➝
6°F ➝ 4°F ➝ 2°F ➝ 0°F ➝ -2°F). Keep in mind that foods like ice cream
may melt at 4°F. The temperature display will move sequentially from -8°F
to 8°F. Five seconds after the new temperature is set, the display will show
the actual current freezer temperature until the new temperature is reached.
Using the Power Freeze
If you need a lot of ice or if you want to cool down the freezer faster, you
can use the Power Freezer function. Press and hold the Freezer/Power
Cool button for 3 seconds. Then, the power freeze indicator will light and
activate the power freeze mode independent of the freezer set temperature.
If you select Power freeze, the inside temperature of the freezer will
decrease for about two and a half hours. When you have enough ice, just
press and hold the button for 3 seconds again to cancel the Power Freeze
mode. Then, the indicator will go out and the freezer will return to the set
temperature again.
All manuals and user guides at all-guides.com
Operating