Publicidad
2X008ebk0.book Page 4 Friday, July 11, 2003 1:38 PM
6
7
F i g u r e 1 - 4 .
8
9
10
11
1-4
Infor mation Update
All manuals and user guides at all-guides.com
Disconnect the CERC card's cable from the backplane.
Remove the plastic insert adjacent to the expansion slots. See Figure 1-4.
R e m o v i n g t h e P l a s t i c I n s e r t
plastic insert
Grasp the expansion card and carefully pull it away from the riser-card connector.
Disconnect the cable from the CERC card.
Connect the cable that was supplied with the replacement CERC card to the four
connectors on the bottom of the replacement card in the order shown in Figure 1-5.
Route the CERC card's cable between the guide tabs and the side of the chassis as you
lower the card into the system. See Figure 1-5.
PCI slot 1
PCI slot 2
Publicidad
