Set-Up; Bug Bag Installation; Trap Placement - Mosquito Magnet Independence Manual De Operación

Ocultar thumbs Ver también para Independence:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Bug Bag Installation:

Reach in the bug bag and fully open the drawstring entrance
before installing. This will help optimize the airflow which will
enhance the performance of your trap.
Lift clear plastic lid and lock plastic holding bracket of bug bag
into front of compartment. Close plastic lid when finished.
Note: Fabric loops hook over plastic posts allowing bug bag to
expand to its highest capacity.
Bug bag locks into front of compartment
7
All manuals and user guides at all-guides.com

Set-Up

Trap Placement

1. Determine the direction of the prevailing wind.
Check local weather patterns if you are unsure.
2. Stand in the center of the area you are trying to protect
and look toward the prevailing wind.
3. Proper placement of the trap will be 30 – 40 feet
in front of you, within 5-6 feet of ground cover (i.e. bushes,
flowerbeds, tree line, marshbed). Ensure that trap is not
directly against any blockades such as buildings, fences, etc.
4. It is recommended that the trap be placed in the shade.
5. Do not place trap directly above a water source
(sprinklers, hose, etc.).
6. Trap must be placed on level ground to avoid tipping
or uneven propane distribution.
7. For optimal trap placement in your yard, refer to the
instructional video at www.mosquitomagnet.com/videos to
build your own yard diagram for correct trap placement.

Publicidad

Tabla de contenido
loading

Productos relacionados para Mosquito Magnet Independence

Tabla de contenido