THOMSON VS530C Manual Del Usuario página 6

Transmisor de video sin cables
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

VS530C
24/10/00 9:56
Installation of receiver
Unfold the cover of this instruction manual in order to view the components
of the Video Sender and refer to the connection scheme on page 7.
1. Place the receiver (5) on, or near, the second television set.
2. Connect the receiver (5) to the second television set using the lead (6)
following the same instructions as for the transmitter.
3. Set up the parabolic aerial of the receiver (5) and point it in the direction of
the main television set (TV1).
4. Raise and extend the telescopic aerial of the receiver (5).
5. Fit the mains supply lead (7) to the receiver and plug it into a
220/240 V ~ 50 Hz mains power supply.
! THE PARABOLIC AERIAL permits the relay of Audio-Video signals to a
maximum range of 30 meters when not hindered by any object. Inside a house
this range is reduced and will depend on the types of material encountered by the
waves.
! THE TELESCOPIC AERIAL permits the control of the unit whose pictures you
wish to see in the room containing the second television set (TV2).
! THE POWER SUPPLY plug fitted to the transmitter (1) is not the same as the
one fitted to the receiver (7).
Page 6
All manuals and user guides at all-guides.com
6

Publicidad

Tabla de contenido
loading

Tabla de contenido