Silent Mode; Smoke Alarm - nedis DTCTCS10WT Manual Del Usuario

Silent mode

In silent mode, the product does not sound the alarm
for 10 minutes. When smoke or CO is detected in silent
mode, A
1 blinks red.
The silent mode must be activated manually.
1. Press the test/silence button A
silent mode.
After 10 minutes, the product goes back into standby
mode.
LED light
Standby mode
A
1
green every 40
seconds.
Hush mode
A
1
yellow every 40
seconds.
Test
A
1
red 3 times,
followed by
a 1.5 second
pause. After
this cycle, A
pulses red 4
times, followed
by a 5 second
pause.
Low battery
A
1
condition
yellow every 40
seconds.
Malfunction
A
1
yellow 2 times
every 40
seconds.
End-of-life
A
1
yellow 3 times
every 40
seconds.
shortly to activate
2
Sound alarm
Off.
blinks
Off.
blinks
3 long beeps
pulses
and 4 long
beeps.
1
Beeps once
blinks
every 40
seconds.
Beeps 2 times
blinks
every 40
seconds.
3 short beeps
blinks
every 40
seconds.

Smoke alarm

A
3 times in a
row, followed
by a 1.5 second
pause.
CO Alarm
A
4 times in a row,
followed by
a five second
pause.
Response time of the product in case
of CO
Concentration of CO
in air. (ppm = parts per
million)
30ppm
50ppm
100ppm
300ppm
CO Alarm
When the alarm beeps four times in a row and the
indicator blinks red:
• Immediately go outside.
• Call the local emergency services (Fire department).
• Do not go back into the building until the
emergency services tell you it is safe.
Smoke alarm
When the alarm beeps three times in a row and the
indicator blinks red:
• Identify the source of the smoke.
9
Beeps 3 times in
1 blinks red
a row, followed
by a 1.5 second
pause.
Beeps 4 times in
1 blinks red
a row, followed
by a 5 second
pause.
Response time of the
product
120 minutes
60 – 90 minutes
10 – 3 minutes
3 minutes