ELICA SUT950 Guía De Instalación, Uso Y Mantenimiento página 4

Thank you for purchasing a Elica Range Hood.
Please read all the instructions in this manual before installing
Save these instructions for future reference.
Only use this appliance as an exhaust ventilation system for the removal of
cooking vapors. DO NOT use to expel flammable substances or any other materials
or vapors.
The installation procedures
instal­lers, service technicians or persons with similar qualified background.
DO NOT attempt to install this appliance yourself.
Ensure that electrical
in­stallation. All electrical wiring must be properly installed, insulated and
grounded and conform to all applicable codes and standards.
Make sure all existing duct work is clean of grease build up, or duct work
should be replaced, if necessary, to avoid the possibility of a grease fire.
Check all joints on ductwork to ensure proper connection and all joints should
be properly taped.
damage any hidden
sufficient air return vents to replace the exhausted air.
Fan ducts should always be vented to the outside of your home and never into
spaces within walls, ceilings, lofts or attics.
for ducting. The exhaust point of the blower requires a 6" round
4
All manuals and user guides at all-guides.com
WARNING
the appliance.
in this
power is turned
Be careful when cutting through ceilings or walls not to
pipes or electrical
manual are intended
off at source
wiring. Ensure
Only use rigid, smooth steel
for qualified
before commencing
your kitchen has
connec­tion.