First Class Millennium Controls And Signals - ELMECO FC1 Manual De Empleo Y De Mantenimiento

First Class Millennium controls and signals

Warning! Do not wash the membrane of the electronic control with abrasive substances or cloths.
Warning! The screen with the "/" symbol indicates that the values are shown alternatively.
Warning! The electronic board will keep the settings it had when the machine was switched off.
• When you switch on the machine (pic.7 pag.82), the following menu will be displayed:
SLUSH / MACHINE
V.32Eb4
In standby mode the auger and the refrigerator system are stopped.
• Press the
key to start the augers rotation. The following menu is displayed:
• To stop the augers rotation, and come back in standby mode, press the
• Pressing the
button, you can select "COLD MODE", "SLUSH MODE" or return to "MOTOR ON"
condition in which the augers rotate. According to the display setting you can see:
MOTOR ON
Press
• The COLD function, cold drink, it allows to have a liquid and cold product in the tank. The Y value can be set
between 2 and 5 using the
Under COLD and SLUSH modes increases the temperature
value or the density value.
Within the menu: changes the status of function/value
selected
Under COLD and SLUSH modes decreases the temperature
value or the density value.
Within the menu: changes the status of function/value
selected
Enter/Exit from the Menu
Within the menu: modify TIME or DEFROST, confirm the
selected value and goes in the next function
Start/Stop rotation of the augers.
Within the menu: modify TIME or DEFROST, horizontal scroll
to the right between the values to be modified
Mode selector key: Motor On - COLD - SLUSH
Within the menu: modify TIME or DEFROST, horizontal scroll
to the left between the values to be modified
And then
MOTOR ON
Press
COLD
Y
or buttons and indicates a more or less cold product respectively.
- 27 -
StandBy
Press
key.
SLUSH
X