Maintenance - Kunft KBIO4445 Manual De Instrucciones

• You should also never line the base of your oven with aluminium
foil.
• During cooking, never place pans or cookware directly onto the
bottom of your oven. They should always be placed on the shelves
provided.
• The grill heating element and other internal components of the
oven becomes extremely hot during operation, avoid touching it
inadvertently when handling the food being grilled.
• Important: be careful when opening the door, to avoid contact with
hot parts of the oven and steam.
• A steam cleaner should not be used.
• Warning: accessible parts may become hot during use. Young
children should be kept well away when in use.
• Do not use harsh abrasive cleaners or metal scrapers to clean the
oven door glass as this can scratch the surface, which may result in
the oven glass shattering.
Replacing the oven light bulb
In order to avoid the possibility of an electric shock ensure that the
oven is switched off before replacing the bulb.
• Set all control knobs to the position "0" and
disconnect the mains plug, unscrew and
wash the lamp cover and then wipe it dry.
• Unscrew the light bulb from the socket,
replace it with a new high temperature bulb
(300º C) with the following parameters:
- voltage: 220 V
- power: 25 W
- thread: E14.
• Do not use any other type of bulb.
• Screw the bulb in, making sure it is properly inserted into the
ceramic socket.
• Screw in the lamp cover.
Removing the oven door
• Open the door completely.
• Fold up the two locking rods on the left and
right sides (figure A).
• Close the oven door until the stop position
is reached. Hold the door in both hands
on both sides, close the door a little more,
then pull it upward and downward and pull
out the door.
E 14
25 W - 230 V~
T 300° C
Lamp
cover
22
built in oven
Installing the oven door
Proceed in the opposite order of door
disassembly
• When installing the oven door, ensure that
both hinges are inserted directly into the
opening.
• Hinge rabbets on both sides must be
occluded.
• When opening the door, spread down the
locking rod (figure B)
If the door drop accidently or hinges shut up suddenly, do not put you
hand in hinges. Please call your after-sell department.
Removing the internal glass panel
Unscrew and unfasten the bracket
latch in the corner at the top of the
door. Then, remove the glass from
the second blocking mechanism.
After cleaning it, insert it, block
the glass panel, and screw in the
blocking mechanism, as shown in the
accompanying figure.
Transportation
Keep the original product packaging and use it should the item need
to be transported.
Follow the transport signs on the packaging.
Tape cardboard or paper onto the inside face of the glass as it will
be prone to damage from the trays. Use cardboard covers for the
wire grill and trays in your oven. Also tape the oven's covers to the
side walls.
If the original packaging is unavailable, take measures to protect
the oven's external surfaces (glass and painted surfaces) against
possible blows, as well as the oven top.

2.3. Maintenance

• The oven should be cleaned after every use. When cleaning the
oven, the lighting should be switched on to enable you to see the
surfaces better.
• The oven chamber should only be washed with warm water and a
small amount of washing liquid detergent.
• After cleaning the oven chamber, wipe it dry.
• Never clean the oven surfaces with a steam cleaner.
• The oven cavity should only be cleaned with warm soapy water,
using either a sponge or a soft cloth. No abrasive cleaners should
be used.
23
EN
KBIO4445