Publicidad
Step 11
1
D430
Groove
Insert the DRAWER SIDES (D429 and D430)
å
at an angle into the slot at each end of the
DRAWER FRONT (G).
3
M63
Surface with
HIDDEN CAM
Fasten the DRAWER BRACE (M63) to the
å
DRAWER FRONT (G). Tighten one HIDDEN CAM.
www.sauder.com/services
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
G
D429
Maximum
Arrow
210 degrees
Minimum
190 degrees
G
VIEW THE T-LOCK BOX VIDEO
2
U n
fi n
s u
i s h
r f a
c e
D430
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the DRAWER BOTTOM (D729) into the grooves
å
in the DRAWER SIDES (D429 and D430) and
DRAWER FRONT (G).
4
D430
M63
D729
Fasten the DRAWER BACK (D61) to the DRAWER
å
SIDES (D429 and D430) and DRAWER BRACE (M63).
Use fi ve BLACK 1-9/16" FLAT HEAD SCREWS (30S).
NOTE: Be sure the DRAWER BOTTOM (D729) inserts
å
into the groove of the DRAWER BACK (D61).
Repeat this step for the other drawer.
å
418647
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
e d
D729
D429
G
Start each screw a few turns before
completely tightening any of them.
30S
BLACK 1-9/16" FLAT HEAD SCREW
(10 used in this step)
D61
D429
Page 15
Publicidad
