Publicidad
Idiomas disponibles
Idiomas disponibles
Pull and plug the terminals on the motor connection cable, as shown below.
If the screen doesn't light up when pressing any keys, please check the battery connection and battery status.
Press
, if the door doesn't move and the screen doesn't light up properly, then please check the motor cable
connection.
If the battery icon
appears, it means your batterie's levels are getting low and you will need to replace them soon.
If the icon
appears, please recalibrate the height of the door.
It's recommended to install the opener in a dry place away from any rain. This will prolong the lifespan of the opener.
Indicator
The LED flashing speed indicates different errors :
Flash frequency
Flash every 2s
Flash every 40s, and flash once when
the screen light is on
Flash for 2 seconds every 2 seconds
Status
The door is either opening or closing
Flat battery
E3 error
E1 or E2 error
Solutions
No action required
Check the battery icon to see battery
status, if icon
appears, change
the batteries.
Refer to the error code table
Refer to the error code table
7
Publicidad
