Accessing Panel Reader Settings; Panel Reader Settings - Tru-Test XRP2 Guia De Inicio Rapido

Modifying the panel reader settings
9

Accessing panel reader settings

To access the panel reader settings:
Press .
The first three items appear on the LCD.
To scroll through and highlight options, press
repeatedly.
To select a highlighted option, press
To exit out of the panel reader settings, highlight EXIT, then press

Panel reader settings

Menu name
®
BLUETOOTH
FIND BT DEVICES
PAIRED DEVICES
DUPLICATES
OUTPUT MODE
DATA FORMAT
DIAGNOSTICS
SOFTWARE VERSION
LANGUAGE
6
or
.
Options Description
Auto* The panel reader will automatically connect to previously used devices or other Tru-
Test devices.
Manual This setting should be used when connecting to an Android
Off Disables the
Allows you to manually search for other
Lists previously paired devices. Select from this list to connect to another device.
On* The panel reader will not record the same EID twice in the same session.
Off The panel reader will record the same EID twice in the same session.
Single* The panel reader will only record and send the same EID once.
Cont (Continuous) The panel reader will record only once but send the same EID each time it is read.
Data format changes the way that EIDs are stored and output from the panel reader.
Dec 1 (Decimal 1)* Standard decimal format with a space between the country (or a manufacturer's,
possibly shared) code and the national identification (or a manufacturer's unique
within series) code e.g. 826 123456789012.
Dec 2 (Decimal 2) Decimal format used in some countries with no space between the country (or a
manufacturer's, possibly shared) code and the national identification (or a
manufacturer's unique within series) code e.g. 826123456789012.
Hex (Hexadecimal) e.g. 8000F58000000001.
ISO Complies with ISO 24631-6 e.g. 1000000826000000123456.
There are four diagnostics screens which provide troubleshooting information. Select
NEXT to scroll through the screens. If the values fall outside the normal range, see
Section 10 - Troubleshooting
Supply voltage The power supply voltage is displayed and should be followed by (OK).
Antenna voltage The antenna voltage is displayed and should be followed by (OK). The tuning value is
and tuning value displayed. The graph should show a dot in the middle band and be followed by (OK).
Noise level Displays the levels of interference being detected. The noise level should be in the
lower part of the graph.
Read rate Displays the reads per minute for the current location of the tag.
The panel reader software version.
ENGLISH You can change the language displayed on the panel reader's LCD.
ESPAÑOL
PORTUGUÊS
FRANÇAIS
DEUTSCH
.
Bluetooth wireless connection.
Bluetooth
.
* smartphone
enabled devices.