Dismantling And Recycling; Statement Of Conformity - GYS DRAW ALIGNER PRO Manual Del Usuario

Operating manual
WARRANTY
The PRO PULLING BRACKET is covered by a two-year warranty from the date of shipment. The warranty covers defects in equipment
and/or workmanship. This warranty is only valid if the maintenance has been carried out according to the instructions in this user
manual. The warranty does not cover periodic maintenance, calibration or regular adjustments. Labour costs related to this type of
operation are not covered. Incidents related to misuse or abuse may void the warranty.

DISMANTLING AND RECYCLING

To dismantle the PRO PULLING BRACKET, refer to the section (Assembly steps) and reverse the order. The PRO PULLING
BRACKET must be disposed of in accordance with current environmental and disposal guidelines.

STATEMENT OF CONFORMITY

GYS certifies that the following new product, PRO PULLING BRACKET (069244), complies with the Machinery Directive 2006/42/EC
of 2006.05.17 and, therefore, also complies with the harmonised standards.
EN ISO 12100: 2010
The CE mark was achieved in 2019. The full declaration of conformity is available on our website.
Translation of the original
instructions
DRAW ALIGNER PRO
17