Installation And Connections - GYS SPOT LIFT PRO Manual De Instrucciones

This manual contains safety and operating instructions. Read it carefully before using the device for the first time and
keep it in a safe place for future reference.
DESCRIPTION
Thank you for your choice In order to get the maximum profit of your product, please read with care the following
instructions:
The SPOT LIFT PRO is a lifting product with a frame in X and is supplied by 2 air bags. This product is for car body
garages to lift the back or the front of vehicles. The lifting part must be less than or equal to 2.5T.
USE
The SPOT LIFT PRO must never be used to lift people. The SPOT LIFT PRO must only be used indoor, sheltered from
rain, wind or humidity. Product's weight and the maximal weight of the load to lift are indicated in this manual. This tool
has not been made for the user to do work under the vehicle. The lack of consideration for the purpose of use can lead
to important risk for the user and this will be his entire responsibility. The product must be only used for its purpose of
use. The user must respect saftey and prevention standards.

INSTALLATION AND CONNECTIONS

The SPOT LIFT PRO is a removable lifting tool, so it must be used on a surface with good conditions.
It must be used on a flat surface which is able to support the load. The use and the transport on a rough surface or
similar precluding a good functioning are forbidden.
10
GYS accepts no responsibility regarding damage caused to people or material due to misuse of
the SPOT LIFT PRO.
Operations must be done by expert or responsible operators. Before starting the installation, you
must prepare a clean suitably large working area. If using a crane, respect the safety require-
ments of the crane. In any event, do not stand under the crane during its operation.
1 - Fixing the handle
SPOT LIFT PRO
See p. 31
for more
details
2 - Assembling the arm
EN