Edenwood CURVE SYSTEM 18P Manual Del Usuario página 25

A
Product overview
AUX INPUT
BALANCED XLR/TRS
INPUT
BALANCED XLR OUTPUT
SPEAKER OUTER
(LEFT CH/RIGHT CH)
MAIN POWER SWITCH
AC SOCKET AND FUSE
Remote control
/
Connects the unit to a computer, mobile device, etc.,
via a 3.5 mm unbalanced stereo input.
Connects the unit to an audio interface or mixer via a
¼" XLR-TRS jack combo socket.
WARNING! Only connect one input source at a time.
Connects additional speakers or subwoofers.
NOTE: This connection is only enabled if you use XLR
or ¼" TRS balanced inputs.
Connects the left and right line arrays to the
subwoofer via the 2 x 6-metre ¼" TRS cables
(supplied).
Switches the power ON (I) or OFF (O).
NOTE: Turn the switch OFF (O) when you are not
using the unit for a prolonged period of time.
Connects the unit to the main power source. The
fuse protects the subwoofer/amplifier from a power
surge/overload.
Controls playback functions in USB and Bluetooth
mode only.
Press to switch between USB and Bluetooth modes.
Selects the previous or next file.
Decreases (-) or increases (+) the volume from V 00
to V 30.
Selects the file or track number.
NOTE: For numbers over 10, press
use the numeric keypad to enter the desired number.
Selects the pre-set equalisation: Pop, Rock, Jazz,
Classic and Country.
Selects the previous or next file/track.
Plays or pauses the file or track.
Press to select a double-digit track number (10+).
Press to select a triple-digit track number (100+).
(Use the numeric keypad to enter the number.)
24 EN
or and then