DragonTouch Vision 3 Manual Del Usuario página 7

4. Loop Recording: Close / 2minutes / 3minutes / 5minutes
Default setting is Close.
Using Loop Recording, you can continuously record video, but save only the moments that
you want. For example, if you select a 5-minute interval, only the previous 5 minutes are
saved when you press the OK button to stop recording. If you record for 5 minutes and do
not press the OK button to stop recording and save, the camera records a new 5-minute
interval by recording over your previous 5 minutes of footage. When the micro SD card is
full, the new files will cover the old one if loop recording is on.
5. Slow Motion: 720P 120FPS, 1080P 60FPS
Default setting is 720P 120FPS.
Slow motion is an effect in film-making whereby time appears to be slowed down.
Note: Slow motion video is captured without audio.
Photo Setting
1. Photo Resolution: 16M / 12M / 8M / 5M / 2M
Default setting is 16M.
2. Timed: Close / 3S / 5S / 10S / 20S
Default setting is Close.
Timed gives a delay between pressing the OK release and the OK's firing. It is most
commonly used to let photographers to take a photo of themselves (often with family).
3. Auto: Close / 3S / 10S / 15S / 20S / 30S
Default setting is Close.
If you select 3S, this camera takes a photo every 3 seconds automatically.
4. DramaShot: Close, 3P/S, 5P/S, 10P/S
Default setting is Close.
Drama Shot (Burst Photo) captures up to 10 photos in 1 second, so it is perfect for
capturing fast-moving activities.
09
All manuals and user guides at all-guides.com
Camera Setting
1. Exposure: -3, -2, -1, 0, 1, 2, 3
Default setting is 0.
By default, your camera uses the entire image to determine the appropriate exposure level
However, Exposure lets you select an area that you want the camera to prioritize when
determining exposure. This setting is particularly useful in shots where an important region
might otherwise be over- or underexposed.
When you change this setting, the LCD display immediately shows you the effect on your
image. If you change modes, the camera returns to using the entire scene to determine
the correct level of exposure.
2. White Balance: Auto, Sunny, Cloudy, Incandescent Light, Fluorescent Light
Default setting is Auto.
White Balance lets you adjust the color temperature of videos and photos to optimize for
cool or warm lighting conditions. When you change this setting, the LCD display
immediately shows you the effect on your image.
3. WiFi: Off / On
Default setting is Off.
Note: You can also hold and press the Up button to turn on Wi-Fi in video or photo mode.
4. Image Rotation: Off / On
Default setting is Off.
This setting determines the orientation of your video or photos to help you prevent upside
down footage.
5.Driving Mode: Off / On
Default setting is Off.
If you turn on driving mode and connect camera with car cigarette lighter, the camera will
turn on automatically if you start your car and will turn off if you stop your car.
6. Light Source Frequency: Auto, 50Hz, 60Hz
Default setting is Auto.
10