How To Operate - nama SJ200 Manual Del Usuario

12

HOW TO OPERATE

Squeeze the release tab
inside the hopper handle
and open the lid.
Turn the knob to the ON
position to start machine.
You will hear a "click" as the
drive shaft engages with
the auger. This is a normal
sound to hear.
1
Insert ingredients into the
hopper below the Maximum
Fill Line.
See the Layering Guide
on Page 15 for information
about the best order to add
ingredients.
4
To add more ingredients
while the juicer is running,
you can add them through
the center hole in the hopper
lid. Use the pusher to help
press ingredients downward.
As a safety measure, the
machine will not run if the
hopper lid is open.
2
Close the hopper lid until
you hear the click of the lid
locking.
Make sure the juice and
pulp containers are in
place by each outlet.
5
Empty the pulp container
as needed to prevent it
from over owing.
Pulp may still continue
to come out after the last
ingredient is inserted.
It can take a minute for
the last ingredient to go
through the juicer.
3
6