Crown CT44088-R Manual Original página 22

Symbol
Movement direction�
Rotation direction�
Locked�
Unlocked�
A sign certifying that the product
complies with essential require-
ments of the EU directives and
harmonized EU standards�
Attention� Important�
Useful information�
Do not dispose of the appliance in
a domestic waste container�
Intended use
Line laser is intended to draw and / or control hori-
zontal, vertical and inclined lines�
Laser beams are projected at 360°, reflecting
vertical or horizontal planes, or its intersection�
This expands the application field of the device
and makes the performance of certain work types
more convenient�
Components
1 Vertical laser beam on / off switch (blue, V1)
2 Indicator
3 Function switch
4 Protective cover of the horizontal laser beam
emitter
5 Protective cover of the vertical laser beam
emitter
6 Laser head position lock
Meaning
English
7 Adjustable leg *
8 Swivel bolt *
9 Horizontal laser beam on / off switch (green, H)
10 Laser beam power indicator
11 Vertical laser beam on / off switch (yellow, V2)
12 Protective cover of USB socket
13 Mini tripod (assembled) *
14 Laser target plate *
15 Remote control *
16 USB cable *
17 Magnet holder *
18 Carrying bag *
19 Mounting screw of mini tripod *
20 Threaded hole for tripod mounting (in the
body of line laser)
21 Tripod *
22 Threaded hole for tripod mounting (in the
body of mini tripod) *
23 Mounting screw *
24 Magnet *
25 USB socket (type C)
26 Power unit *
* Optional extra
Not all of the accessories illustrated or de-
scribed are included as standard delivery.
Installation / regulation
Do not draw up the fastening ele-
ments too tight to avoid damaging
the thread.
Mounting / dismounting on a mini tripod (see
fig. 1)
• Install the appliance on the mini tripod 13 as
shown in fig. 1. When installing, hold mounting
screw 19 with a screwdriver�
• Disassemble in the reverse sequence�
Adjustable legs and swivel bolt (see fig. 2-3)
In case of an indicator 2 will glow red and laser
beams will blinking when the appliance is turned
on, horizontal misalignment of the appliance is
more than ±4°�
Adjust the position of the appliance with legs 7�
When appliance installed correctly, indicator 2
will glow green and the laser beams will stop
blinking�
Rotate the swivel bolt 8 to turn the appliance onto
mini tripod 13 (see fig. 3).
22