Introduction For Buttons On Remote Controller - Daitsu DSF-9UIEE Manual Del Usuario

Introduction for buttons on remote controller

Introduction for buttons on remote controller
Note:
● This is a general use remote controller, it could be used for the air conditioners
with multifunction; For some function, which the model doesn't have, if press the
corresponding button on the remote controller that the unit will keep the original
running status.
● After putting through the power, the air conditioner will give out a sound.
Operation indictor "
conditioner by using remote controller.
1
ON/OFF button
Press this button can turn on or turn off the air conditioner. After turning on the air
conditioner, operation indicator "
The colour is different for different models), and indoor unit will give out a sound.
2
MODE button
Press this button to select your required operation mode.
● After selecting auto mode, air conditioner will operate automatically according
to ambient temperature. Set temperature can't be adjusted and will not be
displayed as well. Press "FAN" button can adjust fan speed. Press " " button
can adjust fan blowing angle.
● After selecting cool mode, air conditioner will operate under cool mode.
Cool indicator "
temperature. Press "FAN" button to adjust fan speed. Press " " button to adjust
fan blowing angle.
● When selecting dry mode, the air conditioner operates at low speed under dry
mode. Dry indicator " " on indoor unit is ON. Under dry mode, fan speed can't
be adjusted. Press " " button to adjust fan blowing angle.
● When selecting fan mode, the air conditioner will only blow fan, no cooling and
no heating. All indicators are OFF. Operation indicator is ON. Press "FAN" button
to adjust fan speed. Press " " button to adjust fan blowing angle.
● When selecting heating mode, the air conditioner operates under heat mode.
Heat indicator "
temperature. Press "FAN" button to adjust fan speed. Press " " button to adjust
fan blowing angle. (Cooling only unit won't receive heating mode signal. If setting
heat mode with remote controller, press ON/OFF button can't start up the unit).
" is ON (red indicator). After that, you can operate the air
" on indoor unit's display is ON (green indicator.
AUTO COOL
" on indoor unit is ON. Press "+" or "-" button to adjust set
" on indoor unit is ON. Press "+" or "-" button to adjust set
DRY FAN
8
HEAT