Important - Philips Lumea BRI958 Manual Del Usuario

C Treatment
IMPORTANT: First finish section A (Remove hair & clean your skin) and B
(Test skin 24 hrs before treatment).
1 Connect the power adapter to the device and plug into a power outlet or
charge the device and use cordless.
2 Press the on/off button
3 Choose the setting you selected after the skin test (section B, step 9).
4 Press the device firmly onto your skin and hold it in place. The 'READY to
flash' light should light up white.
5 Press the flash button to release a flash on your skin. The flash treats the
skin in that spot.
The device makes a soft popping sound. The flash gives you a warm
sensation.
After each flash, it takes up to 3.5 seconds until the device is ready to
flash again. You can release a flash when the 'READY to flash' light lights
up white.
to turn on the device.
17
English