Mobiclinic X-BIKE EVEREST Manual De Instrucciones página 18

EN
Step 5
Screw the rear handlebar (16) to the backrest
bracket (14) with the bolt (17), the curved
washer (5). Then screw the pedal (8) and (7)
to the crank (28) and (29) respectively.
Note: The pedal (7) must be locked clockwise
and the pedal (8) must be locked counter-
clockwise. Keep the pedals (8) and (7) locked
at all times during the exercise. Failure to do
so will damage the pedal teeth.
Step 6
Screw the handlebars (20) to the front
support tube (27).
Screw the handlebar (20) to the front support
tube (27). Align the holes, then tighten the
screw (19), spring washer (21) and curved
washer (5).
Step 7
First connect the monitor cable (30) with the
sensor cable (31), the handle pulse cable (32),
then screw the monitor (22) to it support (33)
with the screw (23).
Step 8
Finally, double check each bolt to make sure they are tight enough.
6