Publicidad
Idiomas disponibles
Idiomas disponibles
16"
(40.6 cm)
1-1/4"
(3.2 cm)
11-1/4"
(28.6 cm)
2-1/2"
(6.4 cm)
1-1/2" OD
Product Information
Applicable product:
Drop-in rim style
Fixture*:
Bathing well
Basin area bottom
45-1/8" (114.6 cm) x 19-11/16" (50 cm)
Basin area top
52-3/4" (134 cm) x 25-5/16" (64.3 cm)
Weight
110 lbs (50 kg)
To overflow
Water depth
15" (38.1 cm)
Capacity
58 gal (219.5 L)
* Approximate measurements for comparison only.
Drop-in cutout dimensions:
58-1/2" (148.6 cm) x 30-1/2" (77.5 cm)
Pump:
Hp
1-speed
1.25
Heater:
kW
1.5
Minimum access panel pump/control:
20" (50.8 cm) W x 15" (38.1 cm) H
1063755-1-B
60" (152.4 cm)
3/4" (1.9 cm)
K-1122P-H
V
Hz
A
120
60
7
V
Hz
A
120
60
12.5
required
No change in measurements if connected
with drain illustrated. (K-7272)
Pump/Control Access
19"
(48.3 cm)
Required Electrical Service (2 required)
Two dedicated circuits required, each protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Heater
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
47 lbs/square foot (230 kg/square meter) loading.
This product is designed for drop-in installation only. It is not
suited for use in a three-wall alcove with an overhead shower.
The hot water supply should be 70% of the capacity of the bath or
greater. Installations will vary.
This fixture conforms to CSA B45 and ANSI Standard Z124.1.2. All
dimensions are nominal.
2
1-1/2"
(3.8 cm)
Drop-in Rim
Detail
32" (81.3 cm)
120 V, 15 A, 60 Hz
120 V, 15 A, 60 Hz
Kohler Co.
Publicidad
