SPC ESPIRARE MAX Manual De Instrucciones página 17

SPC IOT APP
From the SPC IoT application, you can access the different controls your
purifier has available:
If you have device location enabled, you will be able to compare external PM
2.5 values with those measured by your purifier.
1 2 3 4
1. SWITCH
Turn the purifier on or off.
2. MODES
Automatic - The purifier will set the speed
based on the amount of particles detected in the
environment. 0-20 low, 21-50 Medium, 51+ high.
High - The purifier will run at full power.
Medium - The purifier will run at medium power.
Noche - The purifier will run on minimum power to
reduce noise as much as possible and the display
lights will turn off.
3. TIMER
Schedule the purifier to turn off in 2, 4, or 8 hours.
SETTINGS
4.
UV-C - turn UV-C lamp on or off.
Lock - Lock or unlock the equipment touch panel.
Reset filter - Resets the filter change reminder.
Light Mode - Selects the brightness level of the
ambient light. Off, dim, or standard.
Timer - Schedule device on or off (Also accessible
from the main screen in Off mode).
17
EN