Manual Guidelines; Hazard Warnings And Safety Symbols; Hyperlinks; Notes - Geotech G5000 Guia Del Usuario

G5000
Safety Manual

MANUAL GUIDELINES

Hazard warnings and safety symbols

Information in this manual that may affect the safety of users and others will be placed in
a box indentical to this one.
Failure to follow this information may result in physical injury that in some cases could be fatal, cause
damage to the equipment or to the environment, or invalidate the certification of the equipment.
Any general product label symbols that are used on the product should be detailed as below:
CE conformity-The CE-marking is
the manufacturer's statement to
the EU authorities that the product
complies with all relevant CE-
marking directives.
VDE mark is a symbol for electrical,
mechanical, thermal, toxic,
radiological and other hazards.
Electric shock warning.
Double insulated construction -
does not require an Earth.
Equipment group and category. G =
II 2G
gases; the type of explosive
atmosphere.
Fuse

Hyperlinks

Hyperlinks to other sections of this manual, websites or email addresses are in the following format:
www.qedenv.com

Notes

Important/useful information and instructions are shown clearly throughout the manual in a note
format. For example:
Note: For further information please contact Technical Support at QED on +44(0)333 800 0088 or
email technical@qedenv.co.uk.
www.qedenv.com
Page 6 of 44
If the CSA mark appears with the
indicator "US" or "NRTL" it
means that the product is
certified for the U.S. market, to
the applicable U.S. standards.
Separate collection, handling
and disposal for waste electrical
and electronic equipment and its
components.
Refer to operators manual.
Specific marking of explosion
protection (ATEX only).
IECEx licenced mark
(IECEx only).
Equipment for indoor use only.
OM5KSAFETY Issue 11
© QED Environmental Systems Ltd.