Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE AND CLEANING
•
Pull the power plug out of the socket.
•
Drain the water completely.
•
Open the cover to allow the washing drum to dry. Remove the lint filter
and clean it.
•
After you have drained the water from the washing drum, set the control
from "Pump out" back to "Standard".
•
Clean the fluff filter: Remove the lint filter and disassemble it by pressing
the bottom from the inside. Clean the lint filter in warm water. Reassemble
the outer screen after cleaning, set it back in place. Once it is seated
properly, you will hear a click.
•
Disconnect the appliance from the water inlet and attach the drain hose to
the appliance.
•
Rub down the casing. Use only mild cleaning agents for this. Close
the cover and place the washing machine in a well-ventilated place.
Disconnect the power cord from the socket before cleaning. Do not use
harsh cleaning agents. Do not use steel brushes or abrasive cleaners.
Note: The electrical components of the appliance must not come into
contact with water during maintenance. If the power cord is damaged, it
must be replaced immediately by a specialist workshop authorised for this
purpose.
EN
17
Publicidad
