Important Safety Instructions - Sinbo SHD7017 Manual Del Usuario

All manuals and user guides at all-guides.com

IMPORTANT SAFETY INSTRUCTIONS

11. This iron is hot when in use. Do not let eyes and bare skin touch heated surfaces.
12. Do not place the heated flat iron directly on any surface while it is hot or plugged in.
13. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
14. Children should be supervised to ensure that they do not play with the appliance.
15. If the supply cord is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid a hazard.
16. This curling iron and clip are hot when in use. Do not let eyes and bare skin touch
heated surfaces.
17. Do not place the heated curling iron directly on any surface while it is hot or plugged
in. Use the stand provided.
18. Do not use this appliance near bathtubs, showers, basins or other vessels
containing water.
19. Household use only.
SERVICING OF DOUBLE-INSULATED APPLIANCES
In a double-insulated appliance, two systems of insulation are provided instead of
grounding. No grounding means is provided on a double-insulated appliance, nor should
a means for grounding be added to the appliance. Servicing a double-insulated appliance
requires extreme care and knowledge of the system, and should be done only by qualified
service personnel. Replacement parts for a double-insulated appliance must be identical
to the parts they replace.
A double-insulated appliance is marked with the words DOUBLE INSULATION or DOUBLE
INSULATED. The symbol (square within a square) may also be marked on the appliance.
SAFE THESE INSTRUCTIONS
OPERATING INSTRUCTIONS
PARTS IDENTIFICATION
1) Insert the plug into the electrical socket.
Before plugging the appliance into the electrical socket, check that the technical
information written on the curling brush match up with the power supply voltage.
The appliance will begin heating when push the power switch to "ON" position.
2) Place the appliance stand on a flat surface: make sure the appliance is firmly positioned
and not in danger of falling. Then the appliance will begin heating in complete safety,
while keeping the metallic heating element carefully away from the supporting surface.
-10 -