Technical Data; Safety Advice - BGS technic 3229 Instruction Manual

Reversible Air Ratchet, 12.5 mm (1/2")

TECHNICAL DATA

Max. drive speed: 150 U/min
Output profile: external square
Output profile size, metric: 12.5 mm
Output profile size, imperial: 1/2"
Operating torque max.: 68 Nm
Sound pressure level: LpA= 97.47 dB(A)
Sound power level: LwA= 108.47 dB(A)
Vibration level: ahd= 6.56 m/s² / K= 1.5 m/s²
Operating pressure: 6.3 Bar (90 PSI)
Air consumtion: 114.7 L/min (4.05 CFM)
Air inlet: 1/4"
Recommended hose diameter: 10 mm (3/8")
Length: 265 mm
Wight: 920 g
ATTENTION!
Read, understand and follow all instructions and warnings before first use of this air ratchet. Disregard
might cause property damage and/or personal injury as well as expiration of warranty.

SAFETY ADVICE

•
Be sure air is in OFF position when connecting tool to air supply.
•
Always wear approved eye protection when using tools. If raising dust, wear a suitable mask.
•
Use only those accessories that are designed for use with tools. For example, with impact
wrenches do not use ordinary sockets. Use impact sockets for all air tools.
•
Be sure to disconnect tool from air supply before changing accessories, performing service on
tool, and when not in use.
•
As with any tool, use common sense when operating. Do not wear loose clothing or jewelry
that could become caught by moving parts, causing injury. Operate tool a safe distance from
yourself and others in the work area.
•
Follow air source manufacturers directions for connection of regulators, filters, and other
accessories to air source. Do not install quick couplers directly on tool as they put unnecessary
strain on the air inlet threads possibly causing them to wear out prematurely. Instead, install
them on a short length of air hose attached to the tool.
•
Keep children and other unauthorized persons away from the work area.
•
Do not allow children to play with the tool or its packaging.
ATTENTION
Grease the air ratchet with 4 to 5 drops of air tool lubricant before each use.
Only connect with air pressure systems that provide an appropriate air pressure as well as sufficient
air capacity (L/min) for this tool.
.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 3229
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed