Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
TECHNICAL DATA
Chuck capacity: 8 mm (5/16")
Free speed: 1600 rpm
Overall length: 222 mm
Net weight: 2.0 kg
Air inlet: 1/4"
Recommended hose: 10 mm (inner diameter)
Air consumption AVG: 170 l/min (6 cfm)
Working pressure: 6.3 bar (90 psi)
Sound pressure level: LpA 85.10 dB(A)
Sound power level: LwA 95.20 dB(A)
Vibrations level: ahd=0.97 m/s² / K=0.06 m/s²
PRODUCT INFORMATION
• Adjustable depth stop which allows you to drill out just the spot weld and not the panel beneath
• Drills out the entire spot weld, eliminating the need for grinding
• Lower speed decreases heat and extends drill bit life
• Kit Includes:
• Air Spot Weld Drill with 8mm Drill Bit
• 2" Deep Clamp
• Drill Bits 2pcs. 6.5mm and 2pcs. 8mm
• In Line Oiler
• 3 Way Swivel
• Plastic Blow Molded Case
CAUTION
Always wear safety glasses, safety clothing and appropriate equipment when using this product.
Read this manual carefully before use and follow the instructions it contains
•
Milling bits are very sharp and should be handled with care.
•
Always keep your hands and body away from the milling tip.
•
Disconnect the air supply before changing parts or servicing / cleaning the device.
•
Failure to follow these instructions can result in serious injury.
SAFETY INSTRUCTIONS
•
The tool shall not be used in potentially explosive atmospheres.
•
Disconnect the air hose before changing or adjusting any inserted tools.
•
Before using tool, please confirm all couplings and plugs are fixed secure. Air hose that is under
pressure may lash out when disconnect and could lead to serious injuries.
•
Prevent loose clothes, long hair or any other personal accessories from coming close to moving
parts to reduce the risk of being caught, trapped or drawn into the rotating spindle.
•
Excessive high air pressure, that exceeds the maximum pressure, may cause injuries to user.
•
Exposure to strong vibration for extended time may cause harm to operator.
•
Make sure of the rotation direction before starting the tool to reduce hazardous situations due to
unexpected rotation direction.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Air Spot Welding Cutter
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 3205
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
Tabla de contenido
