Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Programming
For a correct operation of a "DUO" digital system, it is re-
quired to program all the devices present in the installa-
tion.
Switchboard is programmed from factory with the ad-
dress 201. If required, this address can be changed fol-
lowing the instructions on the chapter "PDX Address".
In all the internal stations a button must be pro-
grammed with the same address of the switchboard
(according to the previous example 201); for program-
ming please follow the procedure indicated in the tech-
nical manual which comes with the product.
Program the specific function of the door stations with
the address of the switchboard.
Operating functions
The switchboard can operate in the following operating
mode: OFF, ON and Direct Call.
Switchboard OFF (Night)
Switchboard is not operative while the other devices of
the system still continue to work as intended. All the call
directed to the switchboard will be lost.
Switchboard ON (Day)
All the call either originated by the door stations or by
internal users are intercepted by the switchboard except
those made by the secondary door stations which can be
managed by a secondary switchboard (if available in the
system).
Direct dialling
Enabling this function all the calls originated by the door
stations are diverted directly to the internal users without
being intercepted by the switchboard. Switchboard will
handle only the call from internal users and is able to
manage bookings and make inclusions on a communication
in progress.
Operating instructions
Power-OFF
Keep pressed the
button until the switchboard switches
OFF or when the "Device Manager" menu appears select
"OFF" and then press
be not blost.
Power-ON
Keep pressed the button
board powers ON and starts to operate according to the
previous settings ("Normal" or "Direct dialling").
Device manager
When the switchboard is ON, pressing shortly the button
to display the "Device Manager" menu; in the menu are
listed the following functions: OFF, Restart, Keypad lock,
Silent, Ringer ON, Release and Remove mem. card.
Device Manager
- OFF
Restart
1
A
2
D
3
B
E
C
F
G
4
J
5
M
6
H
K
N
I
L
O
Keypad lock
P
T
W
Q
7
U
8
X
9
R
V
Y
S
Z
0
- 20 -
Mi 2453/2
. Already stored bookings will
for some seconds, the switch-
Keypad lock
Activating this function, the keypad of the switchboard is
locked, it is only possible answer to the incoming calls from
door stations or internal users. In "Device Manager" menu
select "Keypad lock" and press
appear
. To unlock the keypad press for several seconds
the button
.
Device Manager
21.09.11
Restart
- Keypad lock
Silent
Linea libera
Ringer tones OFF and ON
To set OFF (or ON) all the ringer tones of the switchboard it
is necessary: - access the menu "Device Manager" by press-
ing shortly the button
will switch-ON. To activate again the ringer tones select
"Ringer ON" and press
Device Manager
Restart
Keypad lock
- Silent
Release
To display the software release of the switchboard and other
informations a bout t he actual configuration s elect "Release"
and press
. To exit this page press
Remove mem. card
To remove the memory card, if inserted in the switchboard,
select "Remove mem. card" and press
press
.
Operating Modes
Enable Direct dialling
To enable the Direct dialling function, where the switchboard
is switched on but all calls are forwarded directly to internal
users, it is necessary to: press
- select "Direct dialling" - press
LED
will switch-ON showing that the Direct dialling
function has been activated
Menu
Booking
Alarms
- Mode
Note: in case of power failure or switching-OFF the
switchboard, the function Direct dialling remains stored
and will be activated again at the next power-ON. If PDX
Type (in the System menu) is set as User, switching from
Normal to Direct dialing and vice versa is not available.
Back to the operating mode "Normal"
To disable the Direct dialling function and operate in "Nor-
mal" mode it is necessary to: - press
– press
- select "Normal" - press
switches-OFF.
Menu
Booking
Alarms
- Mode
; on the display will
11.06
21.09.11
1
A
2
D
3
B
E
C
F
G
4
J
5
M
6
H
K
N
I
L
O
P
T
W
Q
7
8
X
9
R
U
Y
S
V
Z
0
Linea libera
- select "Silent" - press
; LED
switches-OFF.
Device Manager
Keypad lock
Silent
- Ringer ON
.
. To exit this page
- select "Mode" - press
.
Mode
Normal
- Direct dialling
- select "Mode"
; LED
Mode
Back
- Normal
Direct dialling
11.06
; LED
Publicidad
Capítulos
Tabla de contenido
