Remote Control Function - MATTRESS FIRM 500 Manual Del Usuario

Head uP button
Press and hold to raise the head section.
Head down button
Press and hold to lower the head section.
Press and hold to adjust base to the
programmed position.
*To program a position, adjust base to
desired position, press and hold the set
button until the massage motors and
underbed light turn on and off, then
press and hold the Cust 1 button until
the massage motors turn on and off.
Press and hold to adjust base to the
programmed position.
*To program a position, adjust base to
desired position, press and hold the set
button until the massage motors and
underbed light turn on and off, then
press and hold the Cust 2 button until
the massage motors turn on and off.
Head Massage uP button
Press to increase massage intensity.
Massage has 3 speeds: Low, medium
and high. Massage will automatically
shut off after 15 minutes.
Head Massage down button
Press to decrease massage intensity.
Massage has 3 speeds: Low, medium
and high. Massage will automatically
shut off after 15 minutes.
REMOTE CONTROL REqUIRES THREE (3) AAA SIzE BATTERIES (INCLUDED). THE BUTTONS ON
THE REMOTE CONTROL ILLUMINATE FOR 2.5 SECONDS WHEN PRESSED AND RELEASED.
PRESS & HOLD TO ONE TOUCH
To change remote control functions from "press & hold" to "one touch", simultaneously press the HEAD MASSAGE DOWN and FOOT MASSAGE
DOWN buttons. The massage motors and underbed light will turn on and off confirming the change. Your base is now set to "one touch."
When in "one touch" mode:
Cust 1 and Cust 2 buttons
Press and release (one touch) button. Base will adjust to the programmed position. Press any other button to stop the base during movement.
Flat button
Press and release (one touch) button. Base will shut off massage motor, if active, and adjust base to level position. Press any other button to stop
the base during movement.
To revert back to factory settings, simultaneously press and hold the SET button and the FLAT button. The massage motor will turn on and
off confirming the change. Your base is now set to factory settings. Note: Cust 1 and Cust 2 positions will revert to factory preprogrammed
positions.
14
500 Adjustable Base Owners Manual 99301625-d
All manuals and user guides at all-guides.com

reMote control function

cust 1 button
cust 2 button
foot uP button
Press and hold to raise the foot section.
underbed ligHt button
Press to turn underbed light on or off.
foot down button
Press and hold to lower the foot section.
set button
Press and hold to program Cust 1 and Cust
2 presets.
flat button
Press and hold to lower the base to the
level position.
foot Massage uP button
Press to increase massage intensity.
Massage has 3 speeds: Low, medium, and
high. Massage will automatically shut off
after 15 minutes.
Massage on/off button
Press to turn both massage motors on or off.
foot Massage down button
Press to decrease massage intensity.
Massage has 3 speeds: Low, medium, and
high. Massage will automatically shut off
after 15 minutes.
NOTE
NOTE
MASSAGE SETTINGS CANNOT
BE SAvED IN PRESET CUST 1
AND CUST 2 BUTTONS.