5. Installation
5.1. Package content
Check the package contents. If any parts are
missing or damaged, please contact your
supplier.
1 ×
Duux Edge Heater
1 ×
Horizontal mounting bracket
1 ×
Vertical mounting bracket
2 ×
Floor stand
1 ×
Remote control
4 ×
M5 × 10 mm bolt – Philips heads (4×)
4 ×
4.2 × 30 mm screw – Philips head (4×)
1 ×
3.8 × 8mm screw – Philips head (1×)
4 ×
6 × 28 mm plug
NOTICE
• Risk of damaging the product. Remove all the
packaging material before assembling or using
the product. Leaving packaging material on the
product may cause melting of the packaging
material and sticking to the product.
14
5.2. Installation of the product
WARNING!
6
• Fire hazard. Never use the product near
flammable materials or surfaces. The product
may become hot while in use. Keep the product
at a minimum distance of 1 meter away from
flammable materials or surfaces.
CAUTION!
6
• Risk of short-circuiting. Never use an extension
cord. Only use the product on a direct power
source.
• Risk of short-circuiting. Never locate the product
immediately below a power outlet. The product
may become hot while in use. Always keep the
area above the product free from objects and
power outlets.
• Risk of short-circuiting. Never use the product in a
humid environment. Always use the product in a
clean and dry environment.
This product can be used with the floor stand or
mounting bracket.
5.2.1. Required tools
• Screwdriver
• Power drill
• 6 mm drill bit
• Hammer
• Pencil
• Measuring tape