Beurer BC 81 Manual De Instrucciones página 15

If date and time are not set, you will not be able to
save your measured values correctly with a date
and time and access them again later.
Press and hold the M1 or M2 memory but-
tons to scroll values more quickly.
Hour format
• Press and hold the START/STOP but-
ton for 5 seconds until "12 h" flashes
in the LCD Display.
• Select the desired hour format using
the M1/ M2 memory buttons and confirm with
the START/STOP button.
Date
The year flashes in the LCD Display.
• Select the year using the M1/M2
memory buttons and confirm with
the START/STOP button.
The month then flashes in the LCD Display.
• Select the month with the M1/M2 mem-
ory buttons and confirm with the START/
STOP button.
The day flashes in the LCD Display.
• Select the day using the M1/M2 mem-
ory buttons and confirm with the START/
STOP button.
If the hour format is set to 24 h, the day/
month display order is reversed.
Time
The hour flashes in the LCD Display.
• Select the hour using the M1/M2
memory buttons and confirm with
the START/STOP button.
The minutes flash on the display.
• Select the minute with the M1/M2
memory buttons and confirm with the
START/STOP button.
When all data has been set, the device shuts off.
15