URBANGLIDE MONSTER Manual Del Usuario página 7

Assemble around the circular element as shown below, use the M8*40 screws and the M8 bolts
1.
then tighten.
Fasten the seat with the M8 nuts and screws M8*20 as shown below.
2.
Insert the two rods into each other, adjust the rod to the desired length, then fix it with the lock
3.
(N ° 7) and screw. HINT: The maximum length for the rod is 18,4cm.
Pass the strap (L900mm * l25mm) underneath then insert it into the metal piece.
4.
Tighten the strap then fix with M5*8 screws as shown below.
5.