Philips HR2084 Manual Del Usuario página 13

EnglisH
14
troubleshooting
If the appliance does not work or does not work properly, first check
the list below. If the problem is not mentioned in this list, the appliance
probably has a defect. In that case we advise you to take the appliance
to your dealer or to an authorised Philips service centre.
Question Answer
Can I clean all Yes, except the motor unit.
removable parts in the
dishwasher?
The appliance does not Please check if you have plugged in the appliance. Also check if the blender jar
work. What should I do? has been assembled properly.
What does 'pulse' mean? When you press the Pulse button, the appliance will run at its highest
speed as long as you keep pressing the button. Using the Pulse button is
recommended if you want to have more control over the processing job, for
instance when you are chopping.
Can I pour boiling hot
No, let the liquids or ingredients cool down to 80 cC/175 cF to avoid
liquids into the blender
damaging the accessories.
jar?
Why does the motor It is very common for a new appliance to give off an unpleasant smell or emit
produce an unpleasant some smoke the first few times it is used. This phenomenon will stop after you
smell during processing? have used the appliance a number of times. The appliance may also give off an
unpleasant smell or emit some smoke if it has been used too long. In this case
you have to switch the appliance off and let it cool down for 60 minutes.
The appliance stopped Switch the appliance off and use a spatula to dislodge the ingredients that are
running because the blocking the blade unit. We also recommend processing a smaller quantity.
blade unit is blocked.
What should I do?
The blender jar leaks. Switch the appliance off and pour out the ingredients. Then remove the blade
What should I do? unit interface. Check if the sealing ring has been assembled correctly.
Why does the fruit juice Pour the drink through a sieve. To prevent pulp and skins from ending up in
or soy milk contain a lot your drink, leave the measuring cup in the lid, make sure the lid and the filter
of pulp or skins? are in place and the lid is assembled in the correct position (i.e. with the
strainer directly in front of the pouring lip).
All manuals and user guides at all-guides.com